Skip to content
SoundsMeter

Mic Test

A free online microphone test. See live levels, background noise and clipping, then record and play back your voice. Private, no app needed.

Ready

Check that your microphone works

Press Start, allow access, then say a few words.

Input level-- dBFS

Test results

  • Microphone accessNot tested yet
  • Sound detectedNot tested yet
  • Voice levelNot tested yet
  • Background noiseNot tested yet
  • Clipping (distortion)Not tested yet
Microphone
--
Sample rate
--
Channels
--
Latency
--
Processing
--
100% private. Audio is analysed on your device. Recordings stay in your browser and are never uploaded.

How to do a microphone test

  1. 1

    Start the test

    Press Start mic test and choose Allow when your browser asks to use the microphone.

  2. 2

    Pick the right mic

    If you have a headset, webcam or USB mic, choose it from the list at the top of the test.

  3. 3

    Talk normally

    Speak for a few seconds. The bar and waveform should move, and the results fill in.

  4. 4

    Play it back

    Press Record & play back, say a sentence, then stop to hear exactly how you sound.

What your mic test results mean

The meter shows the digital level in dBFS (decibels relative to full scale), where 0 dBFS is the loudest signal your microphone can record. These are good targets for speech on calls, recordings and streams.

Meter readingWhat it meansWhat to do
Flat line, −∞The mic sends pure silence: it is muted or switched offCheck the mute switch, keyboard mute key and system input volume
Below −45 dBFS when talkingToo quiet: others will struggle to hear youMove closer or raise the input volume
−20 to −10 dBFS peaksIdeal speech levelNothing: this is where you want to be
Above −6 dBFS oftenHot: little headroom for laughing or shoutingLower the input volume slightly
0 dBFS, red in the waveformClipping: the sound is distortedLower the input volume or move back
Background above −40 dBFSNoisy room, fan or humFind a quieter spot, or use Call mode or noise suppression

dBFS describes the digital signal, not how loud the room is. To measure sound in decibels (dB SPL), use the sound level meter.

Microphone not working? Fixes for every device

Windows 10 and 11

  • Open Settings > Privacy & security > Microphone and turn on Microphone access and “Let desktop apps access your microphone”.
  • Open Settings > System > Sound > Input, choose your microphone and check that its volume isn’t at 0.
  • Close Zoom, Teams, Discord or OBS if the test says the mic couldn’t start.

Mac

  • Open System Settings > Privacy & Security > Microphone and turn on your browser, then quit and reopen it.
  • Open System Settings > Sound > Input and pick the right microphone. Raise the input volume if the meter barely moves.

iPhone and iPad

  • In Safari, tap “aA” > Website Settings > Microphone > Allow.
  • For Chrome or another browser, open Settings > Apps > [browser] and turn on Microphone.
  • Remove the case if it covers the microphone holes, and disconnect Bluetooth earbuds to test the built-in mic.

Android

  • Tap the icon left of the address bar > Permissions > Microphone > Allow.
  • If it is still blocked, open Settings > Apps > [browser] > Permissions > Microphone.
  • Some phones have a microphone access toggle in Quick Settings: make sure it is on.

Chromebook

  • Open Settings > Privacy and security > Privacy controls and turn on microphone access.
  • Check the input device and volume under Quick Settings > Audio settings.

Headsets, USB and Bluetooth mics

  • Check the mute switch or button on the cable, earcup or mic itself.
  • Choose the headset in the microphone list at the top of the test.
  • Unplug and reconnect USB mics, and try a different port or remove any USB hub.

Mic test before Zoom, Teams, Meet and Discord

If your mic works here, your hardware and browser are fine. When a call app still can’t hear you, the problem is almost always that app’s own settings: make sure it uses the same microphone you selected in this test.

  • Zoom: Settings > Audio > Microphone, then use Test Mic.
  • Microsoft Teams: Settings > Devices > Microphone, or Make a test call.
  • Google Meet: the three-dot menu > Settings > Audio > Microphone.
  • Discord: User Settings > Voice & Video > Input Device, then Let’s Check.

Only one app can use some microphones at a time. Close the call app before testing here, then reopen it afterwards.

Tips for a clearer microphone

  • Keep the same distance: about a hand’s width for a headset mic, 15 to 30 cm (6 to 12 in) for a desk mic.
  • Speak across the mic rather than straight into it to avoid popping “p” and “b” sounds.
  • Soft furnishings such as curtains, a sofa or a rug reduce echo far more than any software setting.
  • Turn off fans and move away from computer fans: they add a constant hum you can see as background noise.
  • Set the input volume so your loudest laugh stays out of the red, then leave automatic gain off if your app allows it.

Testing your whole setup? Check your camera with the webcam test and your output with the speaker test.

More free device tests

Frequently asked questions

How do I test my mic online?

Press Start mic test on this page and allow microphone access when your browser asks. Speak normally: the level bar and waveform should move with your voice, and the results panel tells you whether sound is detected, how loud your voice is, how much background noise there is and whether the signal clips. Press Record & play back to hear yourself.

How can I hear myself on a mic test?

Use Record & play back. It records up to 30 seconds and plays it straight back, so you hear exactly what other people hear. We don’t play your microphone live through your speakers, because that causes echo and screeching feedback unless you wear headphones.

Why is my microphone not working?

The most common causes are: the browser or operating system has blocked microphone access, another app such as Zoom or Teams is using the mic, the wrong input device is selected, or the mic is muted by a hardware switch or a keyboard mute key. If this test shows an error, follow the steps it gives for your device. If the test shows a flat line, the mic is connected but muted.

What is a good microphone level?

For speech, aim for normal talking to peak around −20 to −10 dBFS on the meter, with loud moments staying below −6 dBFS. Below about −45 dBFS your voice is too quiet; touching 0 dBFS means clipping, which sounds distorted.

Is this mic test private?

Yes. The test runs entirely in your browser. Audio is analysed on your device, and recordings are kept in memory only so you can play them back or download them. Nothing is uploaded, and the recording is gone when you close the page.

Does the mic test work on iPhone and Android?

Yes. It works in Safari and Chrome on iPhone and iPad, and in Chrome, Samsung Internet and Firefox on Android. On a phone, the test uses the built-in microphone unless a headset or Bluetooth earbuds are connected.

What does Call mode do?

Call mode turns on the echo cancellation, noise suppression and automatic gain control that video calling apps use. Compare a recording in Raw and in Call mode to hear how much your room noise is reduced, and whether the processing makes your voice sound unnatural.

Can I test a USB, Bluetooth or headset microphone?

Yes. After you press Start, choose any connected microphone from the list at the top of the test. Bluetooth headsets often switch to a lower-quality “hands-free” mode when their microphone is in use, so a playback that sounds muffled is normal for many earbuds.